Quality Policy

Home/Quality Policy
Quality at a Glance

At WILSON, the end product passes through 6 Quality check phrases; as a result of which the quality is Superior & Significantly Consistent.

All incoming raw materials are verified; for their respective grades and quality parameters so that we could deliver better results after manufacturing.

Our quality checking phrases; start from the very early stages of the fabric / sacks manufacturing; since blending of raw materials. We monitor and conduct repeated analysis necessary to ascertain that; the consistency as per requirement of GSM; is met; so that the tapes; extracted out of it; gives best results on the looms.

We conduct the following tests to ensure required quality parameters;

Product Passes

6 Phrases.

Quality
Blending Ratios

Production Manager conveys the ratio of blending to the Plant Manager; who ensures that; blending of virgin raw material, fillers, master batches, stabilizers are blended according to the order specific requirements; to obtain desired results.

Tape Plant

We have defined Quality Control Systems which ensures; that the Strength, GSM, GPD properties are met, according to the order's requirement. Plant Manager closely monitor and initiate immediate actions; accordingly to achieve the accuracy in end product of Tape Plant; i.e. tapes.

Maintaining Stocks of Tapes

Since we manufacturer the products on large scale; every single lot is marked with different colour codes; so that tapes of different GSM are stored separately; and to avoid mixing at weaving stages.

Weaving - (Looms)

Production Manager communicates the production planning down the line; which is closely monitored by respective Shift-in-charge; continuously which is also cross checked by the Mgr. Production on sampling basis; to ensure that the woven PP / HDPE fabric is achieved with minimal weaving errors; is of accurate size; within tolerance of minus 0% and plus 10 to 20 mm. at a maximum.

Liner Plant

Bags; which require protection against moisture are manufactured with liners. WILSON POLYTEX have best Liner Plant available in India; which provides 0% variation in weight; once it's set for desired

Lamination

Lamination is processed, onto the fabrics which require so. Microns of lamination are conveyed and inspection is done lot-wise; upon the laminated rolls to verify the coating results. This process also involves blending of lamination grades; which are set according to the client's requirements.